With Halloween right around the corner it’s time to make come costumes and accessories. The first thing on our list is to make a bow to go along with Miranda’s Robin Hood costume. Our plan was to make this using scraps we had around the garage and have it look fairly good from a few feet away. Below are all the pieces, parts and tools we used to put it together.
A scrap of 1/” PEX
A strip of leather (or an entire jacket)
Brown sprat paint
Vice or a clamp
Respirator if you don’t want to breathe paint
To see how we put it all together checkout the video below.
Well, this may have been one on our most over complicated projects, but it’s something I wanted to play with and I needed an excuse (not necessarily a good excuse). I’ve been wanting to try Sugru (Amazon Associate link) for a long time now and never got around to buying some and when I saw this How to make Proto-Putty video I needed to give it a shot. I didn’t necessarily make these clips because they’re a great idea, but more to see what could be done with Proto Putty.
We tend to give the kids glow sticks while at the campground and after we get inside the kids leave them everywhere. I’ve been meaning to add hooks for them to hang by their beds for some extra light, but I decided it would be much more fun to make some overkill silicone brackets to hold them.
To get started you’ll need:
100% clear silicone #1
Something to mix the silicone
Disposable plates or bowls
Maybe some disposable gloves
To see how we did it checkout the below video.
For a great step by step tutorial check out Grant Thompson’s How to make Proto-Putty video. If you’re looking for an easy way to hang glowsticks you can just use a hook.
For our first project, we decided to celebrate The Walking Dead season 7 premier by creating a replica of Neegan’s bat Lucille. I know, it’s not the most kid friendly project, but it had to be done.
We’ve seen plenty of Lucille replicas out there, but didn’t see one done with a mini-bat. Our goal was to create something that we could display, is easily removed from the display (and used in the event of a zombie apocalypse), and is as accurate and detailed as possible.
We started with a $7 wooden mini-bat, sanded, stained, weathered and added some handmade mini-barbed wire to finish it off. Below are all of the supplies we used for this project.
- 18″ mini baseball bat (Amazon affiliate link to a cheap one)
- Sandpaper (150-320 grit)
- Minwax Colonial Maple stain
- Red spray paint
- Brown spray paint
- Flat black spray paint for the oval
- Satin spray polyurethane
- 18ga galvanized wire for the twisted barbed wire
- 18ga jewelry wire (I stole it from mom) for the actual barbs. It was much easier to twist.
To see how we did it checkout the video below.
As a parent, it’s easy to get distracted by the million things going on around us. As a way to spend more time with the kids and teach them (and myself) something new and stimulate their creativity, I’ve set a goal of creating something new each week. We’ll be selecting each project as a family and the kids will help with each step with good old dad helping along the way. As we make our way through each project they’ll be documented here.
A whiteboard? If you know us, you’ll also know organization and planning aren’t our strong suit. We struggle with keeping organized when on the road and that includes having notes scrawled on random scraps of paper tucked in corners throughout the truck and trailer. Well, to combat this weakness we decided to make a central place to keep notes while camping. And to accomplish this menial task I wanted to use power tools to do it.
The idea is simple. Our RV refrigerator has removable front panels that we’ve already removed and painted to match the walls. So, we removed the panels (the only thing holding them in is some plastic trim and double sided tape) and replaced them with whiteboard paneling that we picked up at Home Depot for $10. All you need to do is remove the original panels, cut replacements the same size and slide them back in. I used a table saw to make all the cuts, but you can use a circular saw, jig saw, hand saw, razor knife or any other sharp tool capable of cutting paneling.
To see how we did it take a look at the below video.
When I made the drawers for our tall cabinet I intended to use push-to-open drawer slides to prevent the drawers from smashing the door open when on the road. Well, I ordered the wrong slides and instead of returning them and waiting for the slides I wanted I decided to use what I had. I was hoping the spring loaded cabinet door catch would keep everything put, but was pretty sure I’d be dealing with this down the road.
When the drawers aren’t loaded all the way everything stays closed just fine, but when we have them loaded up for longer trips the weight slams the drawers into the door and they blast open. While on out trip to Tennessee we made a pit stop at Home Depot to pickup some magnetic catches to help the door hold those drawers in place. I ended up picking up two heavy duty magnetic catches for the task and left them in the cabinet for a month and a half and it turns out you need to install them for them to work. The time has finally come to install them giving us our 2nd Minute Tips video, so check it out below.